Injection molding machine

-Five-point double toggle lever diagonal structure, the template design is optimized by computer

-mechanism, electronic, hydraulic triple interlock safety protection function

-sensitive low-voltage mold protection device

-multi-hydraulic lift type

-multi-level control of mold opening, clamping pressure, speed, positioning

-Hydraulic motor drive gear die adjustment

Specification unit QJT-110 QJT-140 QJT-170 QJT-220 QJT-260
A B C A B C A B C A B C A B C
Screw diameter mm 35 38 42 38 42 45 42 45 50 45 50 55 55 60 65
Screw Aspect Ratio L/D 22 20.3 18.4 24 22 20.5 23.6 22 19.8 24.4 22 20 24 22 20.3
Theoretical Capacity cm 163 193.2 235 226 277 318 311 357 441 397 490 593 592 704 826.2
Injection Weight g 148 176 214 206 252 289 283 325 402 362 446 540 539 641 752
Injection efficiency g/s 89 104 128 94 115 132 138 160 196 124 154 186 233.5 266 312.2
Injection Pressure Mpa 219 184 152 208 171 149 203 177 143 207 168 138 202.3 170 144.9
Screw speed rpm 210 185 180 155 220
Clamping Force kn 1100 1400 1700 2200 2600
Move itinerary mm 350 380 435 475 540
tie rod spacing mm 370*370 420*420 470*470 520*520 570*570
Maximum Die Thickness mm 380 450 520 560 600
Minimum Die Thickness mm 150 160 180 200 200
Exit Trip mm 120 140 140 150 150
Exit force kn 38 50 50 70 70
Pump pressure Mpa 16 16 16 16 16
Motor power kw 13 13 18.5 18.5 30
Heating power kw 7.5 8 12.5 14 19
Host shape (L * W * H) m 4.3*1.3*2.0 4.6*1.3*2.0 5.1*1.5*2.2 5.7*1.6*2.3 6.3*1.7*2.4
Host Weight t 3.4 4 6 7 9.3

SPECIFICATION UNIT QJT-290 QJT-350 QJT-400 QJT-450 QJT-550 QJT-650
A B C A B C A B C A B C A B C A B C D
Screw diameter mm 55 60 65 65 70 75 70 75 80 75 80 85 80 85 80 85 90 95 100
Screw Aspect Ratio L/D 24 22 20.3 21.5 20 18.7 21.4 20 18.8 21.3 20 18.8 22.3 21 19.8 22.3 21 19.9 18.9
Theoretical Capacity cm 676 805 945 1161 1347 1546 1324 1520 1729 1679 1910 2156 2187 2468 2767 2303 2582 2877 3188
Injection Weight g 615 733 860 1057 1226 1407 1205 1383 1573 1528 1738 1962 1990 2246 2518 2096 2350 2618 2901
Injection efficiency g/s 223.5 266 312.2 245 285 327 366 395 446 398 453 511 425 480 538 532 597 665 737
Injection Pressure Mpa 202.3 170 144.9 195 168 146 199 173 152 195 172 152 188 167 149 260 184 164 149
Screw speed rpm 220 160 160 150 150 125
Clamping Force kn 2900 3500 4000 4500 5500 6500
Move itinerary mm 590 670 710 760 900 930
tie rod spacing mm 620*620 710*630 760*760 800*720 900*820 960*880
Maximum Die Thickness mm 630 710 780 800 850 900
Minimum Die Thickness mm 200 260 250 300 350 350
Exit Trip mm 150 200 200 200 250 260
Exit force kn 70 90 110 110 110 200
Pump pressure Mpa 16 16 16 16 16 16
Motor power kw 30 37 37 45 55 30+30
Heating power kw 19 24.5 26 34 36 37.2
Host shape (L * W * H) m 6.3*1.7*2.4 7.3*1.8*2.2 7.3*1.96*2.41 7.6*1.9*2.3 9.3*2.1*2.4 9.6*2.4*2.7
Host Weight t 9.3 12.5 14.2 18.8 23 32

SPECIFICATION UNIT QJT-750 QJT-1000 QJT-1200 QJT-1500 QJT-1800
A B C D A B C D A B C D A B C D A B C D
Screw diameter mm 90 95 105 110 90 100 110 115 110 115 120 125 110 120 130 140 120 130 140 150
Screw Aspect Ratio L/D 23.2 22 19.9 19 35.5 23 20.9 20 23 22 21 20.2 25.7 24 22 20 25.4 23.4 21.7 18.9
Theoretical Capacity cm 2868 3195 3903 4283 2957 3610 4369 4778 5270 5760 6272 6805 6271 7463 8759 10158 7368 8759 10159 11662
Injection Weight g 2610 2907 3552 3898 2657 3285 3976 4348 4796 5242 5708 6193 5707 6791 7971 9244 6705 7971 9245 10612
Injection efficiency g/s 560 610 700 818 580 717 867 948 793 867 944 1024 815 970 1138 1320 1056 1240 1438 1650
Injection Pressure Mpa 195 175 143 131 216 176 146 133 186 170 156 144 208 175 150 129 195 165 145 126
Screw speed rpm 130 100 90 90 85
Clamping Force kn 7500 10000 1200 15000 18000
Move itinerary mm 1000 1000 1180 1350 1550
tie rod spacing mm 1000*940 1080*1000 1220*1000 1310*1300 1500*1400
Maximum Die Thickness mm 1000 1100 1200 1400 1500
Minimum Die Thickness mm 400 400 450 600 700
Exit Trip mm 300 325 325 360 420
Exit force kn 200 245 245 260 420
Pump pressure Mpa 16 16 16 16 17.5
Motor power kw 30+37 37+45 45+55 55+55 45+45+45
Heating power kw 49 59 66 86 95
Host shape (L * W * H) m 10.6*2.6*2.8 12.1*2.64*3.0 12.5*2.7*3.3 15.2*3.0*4.1 16.4*3.2*4.2
Host Weight t 39 53 60 90 125

About us

The company has complete production equipment, mature technology, and parts processing technology has reached the international advanced level. The machine can be designed, configuration and auxiliary equipment can be designed according to the special production requirements of customers to meet the actual production needs of customers. Each blow molding machine is manufactured and assembled according to standardization to ensure the unity of parts, the stability of the machine, easy operation and easy maintenance. The production of all machines, molds and parts is strictly controlled in accordance with the ISO international quality management system standards to ensure stable and excellent quality.

See more

Contact us

  • 0086-13615866111
  • qpowermachine@163.com
  • Jinggong Road, Jiangkou Street, Huangyan, Taizhou, Zhejiang