QJ-A6L Servo Automatic Blow Molding Machine
Illustrate
QJ-A6L series servo automatic blow molding machine can produce up to 9000 bottles per hour, which can be directly connected to the filling equipment, without the need for a bottle unscrambler. This model has the advantages of accurate positioning, low power consumption and fast speed. It is suitable for the production of carbonated beverage bottles, juice beverage bottles, mineral water bottles, cosmetic bottles, edible oil bottles, medicine bottles, daily chemical bottles, beer bottles and other packaging containers of any shape below 1.5 liters.
QJ-A series linear servo machine features:
● QJ-A servo automatic blow molding machine High-speed and stable operation, accurate positioning, advanced microcomputer PLC control system, with high control accuracy, fault self-diagnosis, intelligent monitoring, data management, fault display and other advantages.
● Intensive centralized heating design, small spacing between heated preforms, which can reduce electricity consumption by 30% and make preforms more uniformly heated.
● The servo system is used to control the operation, the movement positioning accuracy is high, the running speed is fast, the stability and reliability are better, and the service life is longer.
● Infrared lamps are used for heating, with strong light penetration, and the width and height of lamps and reflectors in the heating area can be adjusted to suit different structures the heating of the preforms.
● Wide range of bottle types, meeting the production needs of most customers.
● Each mechanical action has a safety self-locking device. When a process fails, the program will automatically switch to a safe state.
● The production process is fully automated, which has the advantages of low investment, high efficiency, convenient operation, simple maintenance and safety.
● With quick mold change function, it only takes 20 minutes to change the mold.
| Project | Unit | QJ-A6L-2S | QJ-A6L-3S | QJ-A6L-4S |
|---|---|---|---|---|
| Materials | / | PET | PET | PET |
| Np. of Cavity | Cavity | 6 | 6 | 6 |
| Maximum volume | L | 1.5 | 1.5 | 1.5 |
| Max Neck diameter | mm | 42 | 42 | 42 |
| maximum diameter | mm | 105 | 105 | 105 |
| Max Bottle Height | mm | 430 | 430 | 430 |
| Theoretical output | BPH | 6000-7000 | 7000-8000 | 8000-9000 |
| low pressure | MPa | 0.8 | 0.8 | 0.8 |
| high pressure | MPa | 3.0-3.5 | 3.0-3.5 | 3.0-3.5 |
| Installation Power | KW | 108 | 108 | 108 |
| Used Power | KW | 73 | 73 | 73 |
| Voltage/Frequency | V/Hz | 220-380/50-60 | 220-380/50-60 | 220-380/50-60 |
| Blow molding machine size | M | 5.2 x 1.73 x 2.8 | 5.2 x 1.73 x 2.8 | 5.2 x 1.73 x 2.8 |
| Blowing machine weight | Kg | 6500 | 6500 | 6500 |
| Preform Conveyor Dimensions | M | 2.15 x 1.5 x 2.85 | 2.15 x 1.5 x 2.85 | 2.15 x 1.5 x 2.85 |
| Preform conveyor weight | Kg | 600 | 600 | 600 |
